Features

 

The ability to continue the cutting process after the cutting wire has been severed and replaced is a unique feature that saves our customers' time and resources. Processing of large and complex projects may cause fatigue of the resistant wire, and may eventually lead to the wire being severed. Since the process can continue once the wire has been replaced, there is no need to restart the project and no source material is wasted. After replacing the wire, Coner ThermoCut continues cutting from the point it left off.

Rotational cutting. ThermoCUT cutters are supplied with a rotating table, which allows for creating revolved solids. The source material can be placed vertically or horizontally. The machine can create revolved solids of up to 3 m (9.8 ft) in size. The cutter is a functional equivalent of a lathe due to the smooth rotation of the source material simultaneous with motion along a predefined path.

Bi-directional cutting while the source material is rotated halves the processing time and supports open shapes.

Support for free-form (irregular) shapes. Using the advanced control software, you can load several different profiles (sections of free-form rotated solids) at the same time, and define the rotation angle between each pair of profiles.

3D visualization. Processing several profiles of free-form rotated solids may sometimes lead to unexpected results, since the cutting lines will overlap in 3D space. To save time and material, you can preview the rendered shape on screen.

Independent motion of both arms. Our new 'P' series cutters can account for perspective while creating shapes - a feature that is unique on the market. Independent motion of both arms, controlled by an advanced software driver, allows for creating 3D forms of varied sizes and shapes. Thanks to the new functionality, cones, pyramids and letters can be created in a single pass of the cutting implement, while accounting for perspective

Remote control allow to avoid necessity of controling directly from computer. Foam cutter control becomes intuitive and more comfortable. Material proccesing can be realize under operator control, who can immediately control foam cutter. Operator has influence on basic device parameters, like speed or resistant wire temperature. Remote control is designed also to control revolving table.

Forming wire (diameter 0,9 mm) allows to obtain incredible effects during material cutting with given shape. Using forming wire together with revolving table, ThermoCUT foam cutters make possible to obtain three-dimensional effects, which are not accessible in that type of machines, for example: screws, solids of revolution with irregular shape, furrows.

 


 
Send an email to FoamCutters
COMPUTER CONTROLLED HOT WIRE FOAM CUTTERS Web design - (c) netopolis 2006